Tuesday, March 4, 2014

Confessions of a FPV pilot. The rover - Part 6

After the tilt servo I could not even add the servo Pan. I added a servo to the base of the tilt webcam and modified the Arduino software Yun and HTML page.

I fixed the servo in an extremely professional way with a kitchen ties.

The Pan servo is linked to the pin number 6. 

Clicking on the black-blue grid is possible to move pan-tilt servos toghether.  

This is a short video of the "Kitchen Tray Project".

All project files are here.

No comments:

Post a Comment